How to Install Renault CAN Clip V236 on Windows 10 and Windows 11

Installing Renault CAN Clip V236 on a modern Windows PC requires some preparation due to the software’s original Windows XP/7 design. Here are the most reliable approaches.

Option 1: Dedicated Windows 7 Laptop (Most Reliable)

The most stable solution for regular workshop use is a dedicated older laptop running Windows 7 (32-bit). CAN Clip installs and runs natively without any compatibility issues. The CAN Clip interface drivers install cleanly, and all functions including UCH programming work correctly.

• Install Windows 7 32-bit on a dedicated laptop
• Install the CAN Clip software and drivers
• Connect the CAN Clip USB dongle and install its driver
• Launch CAN Clip — fully functional with no workarounds

Option 2: Windows 10 with Compatibility Mode

1. Right-click the CAN Clip installer → Properties → Compatibility
2. Set compatibility mode to “Windows 7”
3. Run the installer as Administrator
4. For the CAN Clip USB driver: right-click the driver setup → Properties → Compatibility → Windows 7
5. Disable driver signature enforcement: in Windows 10 Advanced Boot Options, select “Disable driver signature enforcement” before running the driver installer
6. After installation, always run CAN Clip as Administrator

This method works for most CAN Clip functions on Windows 10. Some users report issues with certain programming functions — test thoroughly before use in production.

Option 3: Virtual Machine on Windows 10/11

1. Install VMware Workstation Player (free)
2. Create a Windows 7 virtual machine (or use a pre-configured VM)
3. Install CAN Clip inside the VM
4. Pass the CAN Clip USB dongle to the VM via Player → Removable Devices
5. Run CAN Clip inside the VM with full Windows 7 compatibility

CAN Clip Interface Driver Installation

1. Before connecting the CAN Clip dongle, install the CAN Clip software first
2. Plug in the CAN Clip USB dongle
3. If Windows does not install the driver automatically, open Device Manager → find the unknown device → Update Driver → Browse → point to the CAN Clip driver folder
4. The interface should appear as “CAN Clip Interface” in Device Manager when properly installed

Download Renault CAN Clip V236 →